Food and Beverage Manufacturing

Detectable Removable Equipment

The presence of foreign bodies in food is the primary cause of consumer complaints that can lead to the recall of all products.  The first step in HACCP, BRC Review 8 and IFS control methods is to identify these possible and dangerous (exogenous) foreign bodies, who may cause an illness or injury due to lack of control (Art 14 of the EC Regulation 178/2002 amended in 2003, 2006, 2008, 2009, 2014, 2017 and replaced by EU Regulation 2019/1243 of the European Parliament and of the Council of June 20, 2019).

Every solid body must therefore be easily detectable, either by visual control for regional craftsmen or by industrial vision in large companies: X-rays, HSI hyperspectral imaging systems, 2D and 3D optical vision, colour contrast detectors, OpenCV-Python software application, based on the hue, saturation and brightness (HSB) colour perception.

The absence of blue foods makes this colour the standard for detection.

iBiotec manufactured NSF products allow this detection. All removable bodies, capsules, caps, covers, diffusers, nozzles, extenders with risk, are blue and detectable - DETECT BLUE® equipment.

iBiotec manufactures NSF Approved products in the following categories:

  • Cleaning degreasing solvents
  • Cleaning detergents
  • Lubrication and maintenance oils
  • Penetrating fluid
  • Release agents
  • Technical greases

iBiotec products are approved under the various NSF categories:

  • H1 lubricants: usable in food manufacturing areas. Used as anti-corrosion agents, non-stick seals on tank closures, lubricants for materials located in areas of potential contact with food.
  • K1 solvents: usable outside the food manufacturing areas (the vapours must not enter the manufacturing area) to degrease materials (e.g. conveyor rollers, other mechanical maintenance, etc.) used in manufacturing areas.
  • A1 cleaners: usable in food manufacturing areas. Usable as general cleaning detergent on all surfaces. A rinse with drinking water is necessary after use.

Solvents

NEUTRALENE BIO 1000 SAFETY SOLVENT

  • NSF K1 N°144658 approved
  • Degreasing solvent to downgrade ATEX areas.
  • Flash point closed cup above 100 degrees Celsius. Biodegradable OECD.
  • Strong settling power in degreasing fountains.
  • Without VOC optimization of the PGS, Solvent Management Plan IED Directive
  • DETECT BLUE®blue capsules and caps, identifiable and detectable

NEUTRALÈNE 1079 CLEANING SOLVENT

  • NSF K1 N°156389 approved
  • Odourless solvent, without danger pictogram, easily and quickly biodegradable OECD
  • guaranteed without HC, without MOSH, without MOAH recommendation EU 84/2017 without obligation of retention, usable for the removal of adhesives, inks, non-polymerized resins.
  • Usable in soaking, by wiping, by spraying, in fountains.
  • DETECT BLUE®blue capsules and caps, identifiable and detectable.

NEUTRALÈNE AL 30 - AL 50 - AL 66

COMPLETELY DEODORIZED DEFROSTING SOLVENTS

AL 30 NSF K1 N°146623 - AL 50 NSF K1 N°155966 - AL 66 NSF K1 N°156073 approved

Solvents with optimized flashpoint/evaporation rate ratio.

  • AL 30 Flashpoint 30°C evaporation speed 15'
  • AL 50 Flashpoint 48°C evaporation speed 30'
  • AL 66 Flashpoint 63°C evaporation speed 45'

Useable in manual cleanings or in fountains.

DETECT BLUEz blue caps and blue plugs, identifiable and detectable

NEUTRALÈNE V 200 DEGREASER WITH STRENGTHENED SOLVENT

  • NSF K1 N°149055 approved
  • Degreases and removes all dirt and greases. Ultra-fast evaporation speed.
  • Powerful brake cleaner, chain, handling equipment, lifting equipment, and conveyor cleaner.
  • Dielectric IEC 156 50,000v

DETECT BLUE® blue diffusers and blue caps, identifiable and detectable.

NEUTRALÈNE® VG AL 1 VEGETAL DEGREASING

NSF K1 N°155981 approved

Exceptionally cleaning and dissolving. Eliminates all greases, vegetal bitumen, calcination residues, oily and liquid inks.

Guaranteed HC-free, MOSH-free, MOAH-free product EU recommendation 84/2017

Natural non-flammable propellant 3% only.  Active ingredients 97%

DETECT BLUE® blue caps and diffusers identifiable and detectable

Cleaning Detergents

BIOCLEAN® AL HP SUPER-CONCENTATED CLEANING DETERGENT

NSF A1 N°146624 approved.

For difficult degreasing and cleaning.  Useable on all surfaces.

  • Meets the EU 2017/84 recommendation, guaranteed HC-free, MOSH-free, MOAH-free.
  • Eliminates all greases from mineral, plant, and animal origin, and all inorganic soiling,
  • dust, soot, combustion residues.
  • DETECT BLUE®blue cap identifiable and detectable

BIOCLEAN® INOX AL STAINLESS STEEL CLEANING LUBRICANT

NSF H1 N°153946 approved

  • Eliminates dirt, greases, fingerprints, leaves a protective film, and makes it shine.
  • Odourless, tasteless.
  • Useable on all shades of austenitic, magnetic, and ferritic stainless steel.
  • Raw, glossy, shiny, brushed, patinated, and vibrated finishes.
  • Silicone-free.

Lubrication and Maintenance Oils

NEOLUBE® CT 20 AL SPECIAL HIGH VISCOSITY ADHESIVE CHAIN LUBRICANT

NSF H1 N°155270 approved

  • Non-flammable propellant gas.
  • For all-speed transmission chains, centrifugation resistant.
  • Water repellent, total resistance to water and steam.
  • Useable on all open elements. Extreme pressure, anti-wear.
  • Total lubrication of teeth-shaft-bushing surface contact.
  • DETECT BLUE®2-position diffuser. Diffuser and extension non-strippable and inseparable.

NEOLUBE® F 350 PRECISION LUBRICATION OIL

  • NSF H1 N°149260 approved in aerosol presentation - NSF H1 N°149261 in can
  • Colourless, odourless, tasteless, multifunctional oil with no organoleptic effects.
  • Compatible with all materials. Lubrication of information transmissions, cams, pushers.
  • Sliding agent on conveyors. Non-stick properties, can be used as a removal agent
  • Temperature of use between -20°C +200°C

DETECT BLUE® blue diffusers, caps, blue plugs, identifiable and detectable.

NEOLUBE® SOL 4 SUGAR-DISSOLVING LUBRICATING OIL

  • NSF H1 N°154976 approved
  • Oil for preventive and curative treatment.
  • Helps avoid production shutdowns, guarantees constant weights.
  • Useable pure or diluted in water.

DETECT BLUE® blue cap identifiable and detectable

AIRLINE AL 110 LUBRICANT FOR COMPRESSED AIR

  • NSF H1 N°152591 approved
  • Lubricant for dispensers and volumetric pumps for compressed air circuits.
  • Odourless, no odour transfers possible.
  • Prevents seizure and gumming of materials.
  • No risk of mist or oil mist.

DETECT BLUE® blue cap identifiable and detectable

DEMOPLAST® SIL 850 NON-GREASY NON-STICK LUBRICANT

DEMOPLAST® SIL 850 is NSF H1 N°146626 approved

  • Multifunction silicone oil. Neutral, film forming, non-staining, odourless.
  • Useable on all materials. Is usable as a slip agent for skin packs on conveyor belts.
  • Operating noise reduction.
  • Water repellent and shining agent.

DETECT BLUE® blue nozzles, blue caps identifiable and detectable.

NEOLUBE® SIL 2272 SILICONE OIL FOR AUTOMATED APPLICATIONS

  • NSF H1 N°149259 approved
  • Used as lubricant, release agent, non-stick, water repellent, insulating.
  • Applicable by low-pressure sprayer or in rotating or in translation baskets.
  • Treatment of moulds, nets, cork stoppers.
  • Automatic crimping tools.

DETECT BLUE® blue cap identifiable and detectable

Penetrating Fluid

DP 10 VEGETAL PENETRATING FLUID - 10 FUNCTIONS

NSF H1 N°149304 approved in aerosol presentation
NSF H1 N°152375 approved in bulk presentation

  • Easily and quickly biodegradable
  • CEC L33T82 - OECD 301 A,
  • Natural non-flammable propellant 3%, active agent 97%.
  • Releasing agent, penetrating, deoxidizing, low-load lubrification, anticorrosion, cleaning, degreasing, descaling,
  • non-stick, tar remover, bitumen remover, shining agent for elastomers. Compatible with all materials.

DETECT BLUE® blue cap identifiable and detectable

DETECT BLUE® 2-positions diffuser. Diffuser and extension non-strippable and inseparable.

IMPACT PENETRATING AND LUBRICATING FLUID - MANY FUNCTIONS

NSF H1 N°161700 approved in aerosol presentation

  • Easily and quickly biodegradable
  • CEC L33T82 - OECD 301 A,
  • Natural non-flammable propellant 3%, active agent 97%.
  • Releasing agent, penetrating, deoxidizing, low-load lubrification, anticorrosion, cleaning, degreasing, descaling,
  • non-stick, tar remover, bitumen remover, shining agent for elastomers. Compatible with all materials.

DETECT BLUE® blue cap identifiable and detectable

Release Agents

DEMOPLAST® 750 NON-GREASY FILM SILICONE-FREE RELEASE AGENT

NSF H1 N°146622 approved

  • Non-stick treatment of moulds, lubrication of conveyors, treatment of guides and skin packs cutters.
  • Allows any surface treatment or subsequent sets.
  • Compatible with all materials.

DETECT BLUE® blue caps and diffusers identifiable and detectable

DEMOPLAST® 780 HT SILICONE-FREE HOT SURFACES RELEASE AGENT

NSF H1 N°149309 approved

  • Non-stick treatment of hot moulds, of press trays. Thermoforming blister shells or trays.
  • Allows any surface treatment or subsequent sets. Compatible with all materials.

DETECT BLUE® blue caps and diffusers identifiable and detectable

Technical Greases

NEOLUBE® ALSI 220 SPECIAL SILICONE GREASE JOINTS

NSF H1 N°152745 approved in aerosol presentation
NSF H1 N°149212 approved in tin presentation

  • Meets EU 2017/84 recommendation guaranteed HC-free, MOSH-free, MOAH-free in box presentation.
  • Grease for faucets, joints, elastomers, rubbers.
  • Anti-limestone. Approved for drinking water contact. Electric insulation
  • Temperature of use between -50°C +220°C
  • Extends seal life, resolves misalignment problems and waterproofing defects

DETECT BLUE® blue diffusers, extenders, caps, identifiable and detectable

NEOLUBE® AL 150 TRANSLUCENT GREASE

NSF H1 N°149180 approved in aerosol presentation

N°149181 in cartridge and box presentation

  • Odourless, tasteless grease, without organoleptic effects.
  • Excellent resistance to water, steam, acids, and diluted bases
  • Temperatures of use between -20°C +150°C
  • Suitable for low axial or linear velocities.

DETECT BLUE® blue diffusers, extenders, caps, identifiable and detectable.

NEOLUBE® AL 160 HIGH TEFLON® CONTENT GREASE

NSF H1 N°149201 approved in aerosol presentation

N°149202 in cartridge and box presentation

  • Extreme-pressure grease, anti-wear, anti-corrosion, high film forming for lubrication targeting a large number of operating cycles
  • Temperature of use between -20°C +160°C
  • Suitable for low and medium velocities

DETECT BLUE® blue diffusers, extenders, caps, identifiable and detectable.

Scroll to top