Electrolub 770
Description
ELECTROLUB 770 is a complex compound specifically developed for pulling of electrical cables and wires in sheaths and ducts.
Its formula has been studied such that it now allows for pulls over great lengths, on paths with low radius curves and for all diameters.
ELECTROLUB 770 is stable and inert in response to plastics and elastomers, and therefore ducts and insulators.
ELECTROLUB 770 is extremely easy to use, it is deposited at the entrance of the conduit courtesy of the cannula specially equipped on the can.
Its friction reduction qualities are not impaired by the presence of humidity or water.
On the other hand, ELECTROLUB 770 can be used outside, at temperatures of up to -20°C, without loss of performance.
Can be used in humid environments or in flooded pipes.
Applications
Optimum sliding coefficient, regular pulling tension
For all ICTA, ICA, ICTL sheaths and shafts
IRL tubes
Total neutrality as per ASTM 4289.83, with the elastomers which constitute the insulators or the PE sheaths, EPR, Hypalon, chlorosulfonated PE, PER, PVC, silicone rubbers, polyolefins, PVA, LDPE
Complies with the ICC P1210/D10 specifications (Insulated Conductor Committee IEEE 2015)
Suitable for all temperature classes of wires, cables and conduits
Can be used on old networks even if they are bent or slightly scratched.
Pulling of telecommunications cables.
Installation of sub-tubes.
Do not use for pulling fibre-optics.
Packaging
